Auto Detailing : 

full Exterior detailing involves cleaning, and either restoring or exceeding the original condition of the surface of the car’s finish (usually a paint with a glossy finish), chrome trim, windows, wheels, and tires, as well as other visible components on a vehicle’s exterior. A wide array of detailing products and techniques is used, based on the vehicle’s surface type and condition. Products include, but are not limited to: Pink car wash Shampoo and acid free degreasers (to break down dirt and soil), detail clay (to remove embedded contaminates), waxes and polishes (to resurface and then improve reflectivity), as well as a variety of applicators, brushes, and drying towels. job estimated time 4-6 hours

full Interior detailing involves a deep cleaning of the whole interior cabin. Vehicle interiors of the last 50 years comprise a variety of materials, such as synthetic carpet upholstery, vinyl, leather, various natural fibers, carbon fiber composites, plastics, and others, which necessitates the use of a variety of cleaning techniques and products. Vacuuming is standard, and upholstery stains may be removed using steam cleaning, liquid and foam chemicals, as well as brushes. Additionally, some nonporous surfaces may be polished. job estimated time 3-5 hours

vehicle Winter protection detail:  

• Full wash and preparation of vehicle including thorough cleaning of wheels and all jambs
• Blow out of all crevices with compressed air
• Hand drying of car
• Blow out and wipe down interior
• Thorough vacuum of interior and cleaning of all glasswork.
• Dress tires with Tire Treatment.
• Apply Hydrophobic Ceramic Coating to windshield glass Coating.
• Apply paint sealant to all paintwork and light lense 6 months lasting. job estimated time 4-6 hours

Paint Correction:

the process of restoring and rejuvenating the paintwork of a vehicle, mostly through the elimination of surface imperfections, that dull, oxidize, or haze the surface by reflecting light off in various directions, therefore detracting from a true and proper, clean, sharp, reflection. These imperfections include things like swirl marks & fine scratches, bird dropping etching & acid rain etching, hologramming & buffer trails, and random isolated deep scratches.

Paint correction is a very labor intensive process and is usually the most time consuming part of the car detailing process.

Before any paint correction is undertaken, a thorough wash and decontamination of the vehicle is performed. Paintwork is properly washed and cleaned to remove any loose dirt and debris, then after the wash process is clayed with a specialist automotive clay bar, which safely removes any bonded surface contaminants such as tar spots and industrial fallout.

The polishing is usually a multistage process as a range of different grades of polish are used, ranging from heavier cutting compounds, which remove the surface material, to finer products which then remove any marks that the heavier products may have inflicted and generally refine the finish. During the paint correction process it is common for a paint depth gauge to be used.

Some scratches or imperfections may actually be too deep or severe to safely remove without risking removing to much surface paint or clear coat and so are minimized and reduced as best as possible using techniques with the machine polisher and polish products that round off the edges of the scratches and make them far less apparent in direct light. job estimated time 2-2.5 days

Auto_Detailing_1
Auto_Detailing_4
Auto_Detailing_2
Auto_Detailing_3

Auto Detailing Videos: 

Acura NSX